Blackmagic Design HyperDeck Studio HD Mini, Broadcast Deck, For recording and playback of H.264, ProRes or DNxHD files in SD/HD formats up to 1080p/60 on SD/UHS-II cards or external USB drives, 3G-SDI inputs and outputs, HDMI output, Dual SD card slots allow card swapping while recording is in progress, Integrated clock and time code generators, Front panel controls, Acts like a webcam when connected to a computer via the USB port, Can be used with any video software@+*Connections:*@+@+, 1 SDI video input, 1 SDI video output, SDI rates: 270 Mbit, 1.5 G, 3 G, 1 HDMI video output, Time code connections: 1 BNC input, 1 BNC output, Reference connections: 1 BNC input, 1 BNC output, Tri-sync or black burst, SDI audio inputs and outputs: 16 embedded audio channels, HDMI audio outputs: 8 embedded audio channels, Remote control: 1 RS-422 input, Computer interface: 1 USB-C-3.0 (up to 5 Gb/s) for recording to external drives, webcam output, software configuration and updates, Video sampling frequency: 4:2:2 YUV, Colour accuracy: 10 bit, Colour spaces: Rec. 601, Rec. 709, Rec. 2020, HDR support: Hybrid Log-Gamma, ST2084 300, ST2084 500, ST2084 800, ST2084 1000, ST2084 2000, ST2084 4000, ST2084, Multirate support: automatic detection of SD and HD, 2 SD card slots, 1 USB-C 3.0 expansion port for external recording in SD, HD and 2K DCI, Media type: UHS-I and UHS-II SD cards, Storage media format: formats media in ExFAT (Windows/Mac) or HFS+ (Mac) file systems, Supported codecs: ProRes HQ QuickTime, ProRes 422 QuickTime, ProRes LT QuickTime, ProRes Proxy QuickTime for all formats up to 1080p/60., DNxHD 220x, DNxHD 220x MXF, DNxHD 145, DNxHD 145 MXF, DNxHD 45, DNxHD 45 MXF for 720p and 1080p HD formats up to 60 fps, H.264 SDI 4:2:2 10 bit, H.264 High 4:2:0 8 bit, H.264 Medium 4:2:0 8 bit and H.264 Low 4:2:0 8 bit for all progressive scan formats up to 1080p/60, Built-in control panel: 8 buttons for transport and unit control with seek controller and 2.2"" colour display, External control: RS-422 deck control, SDI start/stop, timecode run, Blackmagic HyperDeck Ethernet Protocol included Supports remote file uploads via FTP, Software included: Blackmagic OS, Blackmagic HyperDeck Setup, Product software upgrades loaded at start-up or via Blackmagic, HyperDeck Setup via USB port, Compatible operating systems: Mac Catalina 10.15, Mac Big Sur 11.1 or higher, Windows 10, 64 bit, 1 integrated AC power supply for 100-240 V, 50/60 Hz, 1x 12V DC power supply unit with 5.5mm barrel connector for external power supply or battery operation ( power cable not included), Dimensions: 140 x 177 x 44.2 mm (1 height unit, one third rack width), Weight: 820 g